| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Principle |
Fuel is measured by taking the density of water as a reference at a constant volume at 20ºC |
Type |
There is a common reduced-diameter type, and it can also be made the same as the American reduced-diameter type |
Accuracy |
It can reach 0.05%, 0.001%, and 0.0002% |
Ruler types |
There are scale rulers, vernier calipers, etc |
Ruler scale |
The measurement range is 100ML to 2000ML |
Size |
The volume range is from 100L to 5000L |
Material |
201,304,316 |
Materials: SS304
Volume: 1,2,3,5,10,20,50L
Provers are the necessity in the gas station for metering the liquid. it is composed of:
Bleed lines are required (instead of bleed valves) on all new provers where air may be entrapped in the dry break coupler and lines going to it.
The level condition of volumetric field standards must be determined by using levels to plumb the neck rather than depending on the top of the neck to be level. The levels on volumetric field standards will be adjusted to agree with this level condition.
Values in the four tables have been updated and the minor scale division (subdivision) is defined as the neck uniformity tolerance.
Size Declaration:
Nominal volumes in each system are ideally selected in multiples of 1, 2, and 5 (liters or gallons) to facilitate calibration. However, a prover may be built to any size to meet specific needs. Non-standard size volumetric field standards that comply with all other requirements shall be considered to be in full compliance with this standard.
The temperature at which test measures and provers are referenced during calibration and during use for testing petroleum products is generally 15.56 °C (60 °F). International standards reference petroleum products to 15 °C. Provers may be used for applications other than petroleum products or in areas where a different reference temperature is used for petroleum products. In such cases, the appropriate reference temperature for the application should be identified and used. For example, the reference temperature for provers used in testing milk is 4.44 °C (40 °F).
Neck diameter of prover may vary; the critical factors to be considered which affect neck diameter is the volume above and below nominal, the graduation sizes, the minimum space between graduations and the use of fill pipes and vapor recovery systems.
* "Total neck volume" is defined as the volume contained in the neck between the bottom-most
scale graduation and the top-most scale graduation." If increased readability of range or
increased sensitivity is desired, the length of the reading scale on the prover may be adjusted with proportional adjustment of neck diameter, provided vehicle/mounted height constraints are not exceeded.
Xuzhou Xuqi International Trade Co., Ltd. is a trusted distributor specializing in high-quality industrial products sourced from two reputable manufacturing companies: Jiangsu Jiasheng Petroleum Technology Co., Ltd. and Xuzhou Yikai Valve Co., Ltd. Both companies operate their own factories, having years of expertise in producing reliable industrial components used across a variety of sectors.
Jiangsu Jiasheng Petroleum Technology Co., Ltd. focuses on the production of key oil industry components, including fuel dispenser accessories, oil tank truck parts, and pipeline fittings. Xuzhou Yikai Valve Co., Ltd. is known for its comprehensive range of stainless steel valves, such as ball valves, gate valves, check valves, and flanged pipe fittings, all manufactured to rigorous quality standards.
As a key partner in the supply chain, Xuzhou Xuqi International Trade Co., Ltd. connects these high-quality products to international markets, serving industries like oil and gas, transportation, petrochemicals, and infrastructure. The company is committed to offering efficient and reliable service, ensuring competitive pricing and timely delivery for customers worldwide.
With a focus on fostering long-term relationships, Xuzhou Xuqi aims to deliver high-value solutions that meet the diverse needs of its clients, backed by the expertise and manufacturing capabilities of its trusted partners.
Q1: Are you a factory or a distributor?
A: We are one of the leading factories in China specializing in the production of oil pipes, tank truck parts, refueling machines and gas station parts. The company covers an area of 10,000 square meters, with independent research and development and production capacity, can provide OEM, ODM services.
Q2: Do you inspect and test products before delivery?
A: Yes, we have 100% testing before shipment.
Q3: What about your delivery time and packing?
A: 5-7 days for samples and 20-35 days after receiving payment for the bulk goods. We use standard export cartons and can also be packed according to customer needs. Sample 5-7 days; 20-35 days after receiving payment for the goods.
){kind=link}